250 Amp 6KW Petrol Welding Generator, Recoil & Self Start, Model: Silent GE-W8000RS
- WeldingOutput Current (Duty Cycle60%) : 250Amps.
- WeldingOutput Current (Duty Cycle100%) : 200Amps.
- Working Voltage : 20v to 30v
- Open Circuit Voltage (OCV) : 65 Volt (Minimum)
- Welding Current Regulation (Amps) : 60 - 250 AMPS
- Rectifying Mode : SCR, Phase Controlled 3-phase, Rectifying Bridge
- Maximum Electrode diameter : 2.6mmto 4.0mm
AC GENERATOR
- Alternator Type : Brushless with Rear Earth Magnet Rotor.
- Rated Ac Output : 4500VA
- Rated Output Current : 19.5 Amps.
- AC. Voltageat No Load : 240Volts±10 Volts,SinglePhase
- AC. Voltageat Rated Load : 220Volts±10 Volts,SinglePhase
- Frequency (Adjustable) : 50to60Hz.
- NFB Amps : 20 Amps.
- Class of Insulation : F
Engine
- Model : HM192PY
- Type : OHV25°Inclined,Single Cylinder,4 strokes, S.I, Forced Air Cooling
- Maximum Power : 16.0 hp @ 3600rpm
- Bore x Stroke : 92×67 mm
- Displacement : 445 cc
- Starting System : Recoil Start / Self Start
- Ignition System : TCI (Transistor Control Ignition)
- Fuel : Standard Petrol
- Fuel Tank Capacity : 15.5 Liters
- Fuel Consumption # Ltr./Hr. 60 % Duty Cycle : 2.0 Ltr./hr.
- Continuous Operating Hour : Approx. 8 hr.
- Lube. Oil Capacity : 1200 ml.
- Lubricating Oil Consumption : 4.3 gm./Hr.
Panel & Other Standard Features
- Ampere Meter : Yes (0 – 300 Ampere)
- A.C. Circuit Protector : Yes
- A C.Pilot Lamp : Yes
- Engine Oil Protection : Yes (Electronic Oil Alert & Indicator)
- Fuel Level Gauge: Yes
- A.C. Output Sockets : Yes (1 Nos.)
- Costar Wheels (6 inch) : Yes (4 Nos.)
- Mono - Rail : Yes
Standard Accessories
- AC Plug : 1Pec.
- Tool Kit : 1 Set
- Welder Holder : 1 Set
- Earthing Clamp with 3Mtr. Cable : 1 Set
- Oil Funnel : 1 No
- Owner’s Manual : 1 No
- Battery Terminal : 1 Set
- Battery Tray & Holding Set : 1 Set
Size & Weight
- Dimension LxWxH (mm) : 1200 x 530 x 710 mm
- Dry Weight (Kgs.) With Wheels& Battery : 149 Kg
- Battery Specification : 12 Volt 18 Ah (9+9)
Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation
Product Information
- WeldingOutput Current (Duty Cycle60%) : 250Amps.
- WeldingOutput Current (Duty Cycle100%) : 200Amps.
- Working Voltage : 20v to 30v
- Open Circuit Voltage (OCV) : 65 Volt (Minimum)
- Welding Current Regulation (Amps) : 60 - 250 AMPS
- Rectifying Mode : SCR, Phase Controlled 3-phase, Rectifying Bridge
- Maximum Electrode diameter : 2.6mmto 4.0mm
AC GENERATOR
- Alternator Type : Brushless with Rear Earth Magnet Rotor.
- Rated Ac Output : 4500VA
- Rated Output Current : 19.5 Amps.
- AC. Voltageat No Load : 240Volts±10 Volts,SinglePhase
- AC. Voltageat Rated Load : 220Volts±10 Volts,SinglePhase
- Frequency (Adjustable) : 50to60Hz.
- NFB Amps : 20 Amps.
- Class of Insulation : F
Engine
- Model : HM192PY
- Type : OHV25°Inclined,Single Cylinder,4 strokes, S.I, Forced Air Cooling
- Maximum Power : 16.0 hp @ 3600rpm
- Bore x Stroke : 92×67 mm
- Displacement : 445 cc
- Starting System : Recoil Start / Self Start
- Ignition System : TCI (Transistor Control Ignition)
- Fuel : Standard Petrol
- Fuel Tank Capacity : 15.5 Liters
- Fuel Consumption # Ltr./Hr. 60 % Duty Cycle : 2.0 Ltr./hr.
- Continuous Operating Hour : Approx. 8 hr.
- Lube. Oil Capacity : 1200 ml.
- Lubricating Oil Consumption : 4.3 gm./Hr.
Panel & Other Standard Features
- Ampere Meter : Yes (0 – 300 Ampere)
- A.C. Circuit Protector : Yes
- A C.Pilot Lamp : Yes
- Engine Oil Protection : Yes (Electronic Oil Alert & Indicator)
- Fuel Level Gauge: Yes
- A.C. Output Sockets : Yes (1 Nos.)
- Costar Wheels (6 inch) : Yes (4 Nos.)
- Mono - Rail : Yes
Standard Accessories
- AC Plug : 1Pec.
- Tool Kit : 1 Set
- Welder Holder : 1 Set
- Earthing Clamp with 3Mtr. Cable : 1 Set
- Oil Funnel : 1 No
- Owner’s Manual : 1 No
- Battery Terminal : 1 Set
- Battery Tray & Holding Set : 1 Set
Size & Weight
- Dimension LxWxH (mm) : 1200 x 530 x 710 mm
- Dry Weight (Kgs.) With Wheels& Battery : 149 Kg
- Battery Specification : 12 Volt 18 Ah (9+9)
Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation
Warranty
|
Warranty Summary |
|
|
Service Type |
|
|
Covered in Warranty |
|
|
Not Covered in Warranty |
|
Rakesh Das
During extended welding tasks, the generator maintained thermal stability and did not exhibit voltage fluctuations. Fuel efficiency is commendable, with low idle consumption. Ideal for remote job sites requiring consistent, portable welding power.&rdqu
Sayan Mukherjee
“Picked this up for some hobby welding at home. Starts right up, and the arc is steady. Fuel lasts a good while before I need to refill. It’s a bit loud, but not crazy. Handles fine if you need to move it around the yard.”
Arif Ansari
Used it for a weekend fence repair. Loved how quick it fired up and kept running without hiccups. I was worried about fuel, but it’s pretty efficient. The wheels make it easy to move even on rough ground.
Ram Lal
welding krne k liye yh bhit bdiya generatro hai portable light weight hai or asani se ise ek jgh se dusri jgh rkh skte hai kafi acha backup deta hai ... dhaywaad himalyan powers
Aditya Rathore
hi my name is aditya and i have a samll welding shop so i bought this generator from himalyan powerds and this is working so nicely i love how it is giving a nice perfomance and nice backup thank u himalyan power
Raghav Jha
“Really handy generator for quick jobs. Startup is simple, and I didn’t have any trouble keeping a smooth weld. Noise is noticeable but expected. Portability is okay — could use a better handle design, but manageable.”
Siddharth Desai
“Bought this for some small farm projects. Fired up immediately and ran my stick welder perfectly. Didn’t burn through much gas, and I could take it to different parts of the farm easily. Overall, very happy with it.”
You May Also Like
